audio, video and led solutions since 1993
A
24 months
Unique powered cardioid system.
Class D, the most efficient amplifier on the market. Horizontal dispersion control and tonal balance down to 100Hz. The systems incorporate a diagnostic function (impedance and frequency response measurements) that allows the user to check the system status without the need of external software. This is accessible from the rear panel of each amplifier.
Delivery time 3-4 weeks
Warning: Last items in stock!
Availability date:
Speaker type ( format ) | 4-way symmetrical, cardioid, self-amplified line array |
Operating Range | 63 Hz – 17 kHz ( - 10 dB ) |
Nominal Amplifier Power | 6000W continuous |
Maximum output | SPL1 - 146 dB / SPL2 - 150 dB ( 1. Measured Maximum Linear SPL at 1m according to AES75 standard using 18dB crest factor M-Noise / 2. Measured Maximum SPL at 1m using burst noise ) |
Nominální -6dB vyzařovací úhel | 80ºH x V ( Splay Dependent ) |
Input Impeadance | 20 kohms |
Input Sensitivity | 6.2 V (+18 dBu) |
Input Type | Balanced Analog |
Input / Output Connector | XLR |
Audio Signal Loop Thru Connector | etherCON |
Control | ALMA |
Enclosure Construction | Birch Plywood, Trapezoidal 7º, ISO-flex Paint |
Rigging | Captive Rigging System |
IP Rating | IP43 |
AC input connector | powerCON TRUE1 |
Current Draw / 230 V | 7.5 A |
Dimensions ( height x width x depth ) in mm | 355 x 1.170 x 645 |
Weight in kg | 86 |
LARA - features:
LARA® is a 4-way symmetrical, cardioid, self-amplified line array system with 6000Wrms power. LARA® has a linear performance of 146 dB SPL MAX and a wide dynamic range making it an ideal system for large events. Thanks to the cardioid design, we achieve a rear attenuation of -15 dB in the range of 63 Hz – 200 Hz.
LARA® incorporates 2 x 12″ woofers with a 4″ voice coil plus another 2 x 8″ in cardioid configuration; for the midrange, it uses another 2 x 8″ speakers with 2.5″ voice coils. The high-frequency section is made up of two DAS M-78N compression drivers, with 3″ voice coils and a 80º horizontal dispersion waveguide. All the elements have been designed and purpose-built to maximize the system’s efficiency.
The LARA® class D amplifier integrates a switching power supply with power factor correction (PFC), ensuring maximum performance and efficiency regardless of the mains voltage. Each amplifier provides 6000Wrms divided into eight channels, 3 of them in bridge mode to feed the 2 x 12″ and the two compression drivers. The remaining two channels feed the front 2 x 8″ and rear 2 x 8″ transducers.
The 3-point rigging system works for both LARA® and LARA® SUB, allowing us to hang arrays of up to 24 LARA units and 16 LARA® SUB units. The FSS TM (Fast Set Splay) angulation system allows angles to be adjusted in steps of 1º, from 0º to 7º from the stacked position, significantly reducing assembly time.